Custom Metal Milling Turning Service titaium CNC Machining titanium Parts with Laser Cutting OEM
Advantages of titanium products: Low density (4.51KG/m3), high melting point (1660℃), strong corrosion resistance, high specific strength, good plasticity. Forging and turning, 100% ultrasonic flaw detection
| Material | titanium grade 2 grade 5 ... |
| Precision processing | CNC machining ,CNC turning, CNC milling, drilling, grinding, wire-EDM cutting , |
| Surface finish/treatment | Anodizing,Sand blasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving |
| Drawing Format | jpg/.pdf/.dxf/.dwg/.igs./.stp/x_t. etc |
| Tolerance | 0.003mm-0.01mm |
| Quality assurance | - Technicians self-check in production |
| - Engineer spot check in production |
| - QC inspect after products finished |
| MOQ | 1pc |
| Production time | 2~30 working days |
| Application | Aerospace, Electric Vehicles, Firearms, Hydraulics and Fluid Power, Medical and Dental, Oil and Gas, and many other demanding industries. |
Usually we will provide a quality inspection report with the goods,
which shows the chemical composition and physical properties for the material.
Titanium is corrosion-resistant, so it is often used in the chemical industry. In the past, the parts containing hot nitric acid in chemical reactors were made of stainless steel. Stainless steel is also afraid of the strong corrosive agent - Hot nitric acid. This kind of parts should be replaced every six months. Using titanium to make these parts is more expensive than stainless steel parts, but it can be used continuously for five years, which is much more cost-effective.
In electrochemistry, titanium is a one-way valve metal with very negative potential, which can not be decomposed with titanium as anode.
The biggest disadvantage of titanium is that it is difficult to refine. This is mainly because titanium has a strong ability to combine with oxygen, carbon, nitrogen and many other elements at high temperature. Therefore, no matter in smelting or casting, people are careful to prevent these elements from "invading" titanium. When smelting titanium, air and water are strictly prohibited. Even the alumina crucible commonly used in metallurgy is prohibited, because titanium will capture oxygen from alumina. People use magnesium and titanium tetrachloride to react in inert gas helium or argon to extract titanium.
People take advantage of the strong chemical combination ability of titanium at high temperature. When steelmaking, nitrogen is easy to dissolve in molten steel. When the ingot is cooled, bubbles are formed in the ingot, affecting the quality of steel. Therefore, steelmakers add metal titanium to the molten steel to combine it with nitrogen to become slag titanium nitride, which floats on the surface of the molten steel, so that the ingot is relatively pure.
When a supersonic aircraft flies, its wing temperature can reach 500 ℃. If the wing is made of heat-resistant aluminum alloy, Baidu will not be able to afford it. There must be a light, tough and high-temperature resistant material to replace aluminum alloy, and titanium can just meet these requirements. Titanium can also withstand the test of more than 100 degrees below zero. At this low temperature, titanium still has good toughness without brittleness.
The strong absorption of titanium and zirconium to air can remove air and cause vacuum. For example, a vacuum pump made of titanium can pump air to only one hundred thousandth of a billion.
Cooperate with us
100% quality inspection, quality assurance.
Professional titanium manufacturing experience. Because we only make titanium, we are more professional in titanium
ISO9001:2015 certification
Friendly customer service and short delivery time.
Welcome to contact us for detail :)
We can make titanium parts according your drawing or sample
Product Tags:
|
|
OEM Anodizing CNC Machining Titanium Parts With Laser Cutting Images
|
